- 2.2kW 110 VDC float Charger.
- Two 1.1kW Hot Swappable rectifiers.
- Fully programmable touch screen controller.
- Single Phase 230VAC input protected by surge protection monitored by the system
- 32A 2 pole Battery Breaker monitored by the system.
- 32A DC Output Breaker monitored by the system
- DC High, Battery Low, AC Mains High/Low, Rectifier Fail, System Major Earth Fault and Controller Fail Programmable alarms on voltage free relay contacts.
Low DC Power Applications – Wall Mount
- SEC-SR wall mount cabinet with dimensions 405H x 444W x 273D mm.
- 750W 24VDC power supply.
- Digital V/I meter.
- 24V DC Input terminals for redundant applications.
- Mains Fail, DC Low and Tamper alarms in the form of voltage free contacts.
- 4 x 10A 1P Distribution MCB’s
- 6A 1P Mains Input MCB.
- 6U 500W 24VDC Wall Mount Battery Charger
- 6A Mains Input MCB
- P50 Output Diode
- 32A 2P Charger Output MCB
- Digital V/I monitoring the Output
- 32A 1P Load Output MCB
- 32A 1P Battery MCB
- Load LVD
- Mains Fail, DC High, DC Low, System DC Low and General Alarm on voltage free relay contacts.
The Sol Series - Wall Mount 125VDC 2.2kW Compact Size & Big Performance
- 125VDC up to 2.2kW Single Phase Wall Mount.
- Can be used as stand-alone power supply without batteries.
- Single phase surge protection incorporated.
- Hot swappable power modules.
- Convection cooled system.
- Common Form C alarm relay contacts (6).
Using marine grade aluminium to protect from corrosion, our pole mounted enclosures are engineered to accommodate electrical powering equipment, racked in a pole mount configuration. Our custom designed pole mount solutions can be made to suit your requirements and can either house batteries inside the cabinet, or for a more compact solution can house batteries separately in an underground box.