The ECP130 series is designed to minimize the no load power consumption and maximize efficiency to facilitate equipment design to meet the latest environmental legislation. Approved for medical and ITE applications, this range of single output AC-DC power supplies are packaged in a low profile 1.1″ height with a foot print of just 2″ by 3″. The ECP130 provides up to 130W force-cooled or 100W convection-cooled leading to very high power densities of 19.7 W/in3 or 15.1 W/in3 respectively.

The power supply contains two fuses and low leakage currents as required by medical applications and is safety approved to operate in a 80 °C ambient. The low profile and safety approvals covering ITE and medical standards along with conducted emissions to EN55011/22 level B allow the versatile ECP130 series to be used in a vast range of applications.



Model  Input Output Power
ECP130PS12 85 to 264 VAC 12 V / 10.83 A 130 W
ECP130PS15 85 to 264 VAC 15 V / 8.66 A 130 W
ECP130PS18 85 to 264 VAC 18 V / 7.22 A 130 W
ECP130PS24 85 to 264 VAC 24 V / 5.41 A 130 W
ECP130PS28 85 to 264 VAC 28 V / 4.68 A 130 W
ECP130PS36 85 to 264 VAC 36 V / 3.61 A 130 W
ECP130PS48 85 to 264 VAC 48 V / 2.70 A 130 W


Input Voltage: 85 to 264 VAC. Derate load from 100% at 90 VAC to 85% at 85 VAC
No Load Input Power <0.5 W
Harmonic Currents: EN61000-3-2, class A
Efficiency: 95% typical
Operating Temp: -30 °C to +80 °C. See datasheet for derating.
Isolation: 4000 VAC Input to Output 2 x MOPP
1500 VAC Input to Ground 1 x MOPP
1500 VAC Output to Ground 1 x MOPP
Worldwide Safety Approvals: IEC60950-1:2005, IEC60601-1 Ed 3.1 Including Risk Management
European Safety Approvals: EN60950-1, EN60601-1, CE Mark LVD
US Safety Approvals: UL60950-1, CSA 22.2 No.60950-1-11 Ed 2, ANSI/AAMI ES60601-1: & CSA C22.2 No.6061-1:08
EMC: EN55011 class B conducted
EN55011 class A radiated (class B – see datasheet)

Related Products