Hybrid Power Series

48V and 24V DC Power System with integrated 12V or 24V DC Converter

Many wireless communications sites require different DC voltages to power a range of devices, whether 48, 24 or 12 volts DC. This often means installing multiple power supplies or DC converters which may not always be feasible given limited rack space or budgets.

Fully Controllable and Monitorable Dual Output DC Power System with Advanced Battery Management

The ICT Hybrid Power Series is designed to meet this need. It combines a 48 or 24 volt DC power system with a factory installed 12 or 24 volt DC converter module to provide a 1400 watt maximum power flexible hybrid DC solution for wireless network sites. The Hybrid Power Series accepts one or two hot swappable 48 or 24 volt, 700 watt DC Power Modules.

The integrated DC converter provides up to 700 watts of 12 or 24 volts DC output through a separate output bus bar.  Ethernet-based communications and control is standard on every model. System and battery monitoring are provided through a secure web-based server or SNMP. Outputs can be turned off and on, and various parameters can be controlled and managed remotely.

1U Rack Mount Dual Output DC Power System for wireless communication networks


  • Wireless two-way communications networks
  • Trunked radio systems
  • Microwave
  • Backhaul
  • DAS
  • Security and surveillance
  • Automation
  • Protection and control

Other features

  •  90 to 93% efficiency
  • -30 C to +60 C operating temperature range
  • TCP/IP Ethernet is standard on every model – provides complete and easy-to-use remote monitoring and control of the power system using built-in web server and graphical user interface or SNMP
  • Battery Backup with 150A LVD and adjustable disconnect and reconnect voltage setpoints
  • Single or Dual 100A battery disconnect breakers
  • User Adjustable output voltages and battery charge current limit
  • Compatible with Lithium-ion batteries but battery monitoring and reporting is done by the battery itself. (read Using DC Power Supplies and Battery Chargers with Lithium-ion batteries for more info)
  • Advanced Battery Management (for lead acid batteries)
    • Battery state of charge and charge current reporting
    • Estimated run-time remaining
    • Battery discharge testing
    • Temperature compensated charging
  • Digital and Analog inputs for temperature and site sensors
  •  Full range of certifications including CSA/UL, FCC Class B, CE, ROHS

For a fully controllable and monitorable DC System, use our Dual Bus DC Distribution Panels

Weight3.7 kg
Dimensions483 × 398 × 44 cm

Specifications Table


Nominal system voltage120/240VAC
Input voltage range100-300VAC
Power factor (typical)0.99
See datasheet
AC input connectorTerminal Block, #8 – #16 AWG
DC output connectorBusbars with 1/4-20 x 7/8” bolts
Remote alarm connectorsTerminal Block (#16 -24 AWG)
Mounting1RU, 19 in rack mount
Weight (Power Shelf empty)8.1lbs / 3.7 kg
Weight (Power Shelf + 4 modules)3.7kg
Dimensions – H X W X L 1.74 x 19.0 x 15.7 in. / 44 x 483 x 398 mm
Operating temperature range -30º to +60ºC
Output derating2% / ºC (above 50º C)
Storage temperature   -45º to +85ºC
SafetyEN 60950-1
EmissionsEMC compliance with FCC Part 15, Class B, EN61000-6-1, EN61000-6-3, EN61000-3-2, RoHS, CE

Series Table

ModelPrimary Output Voltage
1400W (max)
Secondary Output Voltage Floating 700W (max)Number of battery breakers

Power Modules Series Table

Model Output VoltageOutput Power

You may also like...